Product Description
The Silicone Coke Bottle Ice Mold produces novelty cola bottle-shaped ice sticks for use in beverages, cocktails, and promotional bar settings. Each of the five cavities is shaped as a miniature cola bottle — waisted profile with neck and base — so the finished ice pieces are immediately recognizable as iconic bottle forms. The tray is sized to produce five ice sticks per fill cycle, each approximately 1×5cm.
The two-piece construction addresses the primary failure mode of novelty ice molds: leaking during filling and transport to the freezer. The rigid lid with individual fill holes sits over the flexible base and clips into place, keeping water contained until frozen. Once set, the flexible silicone base inverts to release all five ice pieces cleanly without chipping or cracking the shaped surface.
Specification | Detail |
Product Name | Coke Ice Mold |
Dimensions | 16 × 2.8 × 24 cm |
Cavity Count | 5 (per tray) |
Ice Stick Size | Approx. 1 × 5 cm per piece |
Weight | 208.4g |
Material | Food-grade silicone |
Colors | Red / Grey |
Construction | Two-piece: lidded top + flexible base |
Logo Customization | Laser engraving / Screen printing / Heat transfer / Water transfer printing |
Certifications | Food-grade LFGB / FDA compliant, BPA Free |
Each ice cavity replicates the classic cola bottle waisted profile with a defined neck. The resulting ice sticks are recognizable novelty pieces that photograph well in drinks for social media, add visual interest to bar service, and function as branded talking points for promotional use. This distinguishes the product from generic cube or cylinder ice molds and supports premium positioning in retail and hospitality.
The lidded top secures over the flexible base, preventing spill during filling and freezer loading. Individual fill holes on the lid allow precise filling of each cavity without overflow between cavities. The silicone lid is rigid enough to hold shape during transport to the freezer but flexible enough to clip and unclip cleanly. This design specifically addresses the leaking problem that makes open-top novelty molds impractical.
The tray surface accepts four printing and engraving methods: laser engraving (permanent, surface-level), screen printing (flat logo on tray body), heat transfer printing (full-color design), and water transfer printing (wrap-around pattern). This range of methods allows brand buyers to match the logo output to their preferred brand standard — embossed for premium feel, printed for color fidelity. The 1×5cm logo application area on the tray base is noted in the specification image.
Full food-grade silicone construction means the tray is dishwasher safe, odorless, and does not absorb flavors from previous use. Silicone remains flexible at freezer temperatures, enabling clean ice release without the cracking or sticking that affects rigid plastic novelty molds. The material also withstands boiling water for cleaning or chocolate/candy molding applications beyond ice.
Bar equipment and cocktail accessory wholesalers sourcing novelty ice molds for hospitality supply channels
Brand promotional merchandise buyers sourcing custom-logo ice molds for beverage brand activations and promotional giveaways
E-commerce sellers in kitchen gadget and barware categories building a novelty ice maker product range
Retail kitchenware buyers for lifestyle, homeware, and party supply stores
OEM buyers building custom-branded kitchen accessory lines for beverage, food, and lifestyle brands
Color, logo method, and packaging are customizable for OEM orders.
Option | Details |
Colors | Red / Grey (standard); custom Pantone color available for OEM |
Logo Methods | Laser engraving / Screen printing / Heat transfer / Water transfer printing |
Logo Area | Tray body surface (approx. 1×5cm application zone) |
Packaging | OPP bag (standard); custom retail box; gift box; branded insert card |
Custom Mold | Different bottle shape or cavity count available with new mold development |
Stage | Lead Time |
Sample (stock color, no logo) | 3–5 business days |
Custom color + logo + packaging | 7–15 business days |
New mold development | 25–35 business days |
1. What shape are the ice pieces — and how large are they?
Each cavity produces a miniature cola bottle-shaped ice stick: waisted profile with a neck and base, approximately 1cm wide × 5cm tall. The five pieces produced per tray are sized to fit inside standard glasses, cocktail tumblers, and canned drink cups. The ice bottle shape remains recognizable after release and does not flatten or distort once frozen.
2. How does the two-piece design prevent leaking during freezer loading?
The lid clips over the base, enclosing each cavity. Fill holes in the lid are positioned directly above each cavity neck — water fills from the top and the lid seals the opening before transport to the freezer. The clip connection holds the two pieces closed during normal movement. If the tray is tilted, the lid prevents water from spilling between cavities or over the tray edge.
3. Can this mold be used for chocolate, candy, or gelatin — not only ice?
Yes. Food-grade silicone is heat-resistant and compatible with chocolate (tempered at up to ~50℃), gelatin, gummy candy, and fondant molding applications. The flexible base releases set chocolate and candy as cleanly as it releases ice. This extends the product's retail positioning beyond ice to baking and confectionery accessories.
4. What logo customization methods are available and which is most durable?
Four methods are available: laser engraving (most durable — permanent surface marking that does not wear off), screen printing (standard for flat logos, wears with heavy dishwasher use), heat transfer printing (supports full-color designs), and water transfer printing (supports wrap-around patterns). For promotional merchandise with long-term brand visibility, laser engraving is recommended. For full-color brand designs, heat transfer is preferred.
5. Is the mold dishwasher safe?
Yes. Full food-grade silicone construction means the tray — both lid and base — is dishwasher safe (top rack recommended for longevity). The silicone does not absorb odors or flavors from previous use, so ice made after dishwasher cleaning is odor-neutral.
6. What is the MOQ for custom logo and color orders?
MOQ depends on customization level. Standard color (Red or Grey) with logo on packaging: lower MOQ. Custom Pantone color on silicone + logo engraving/printing: higher MOQ. Contact us with your target quantity, preferred logo method, and color requirements for a specific quote. Samples available within 3–5 business days for existing specifications.
Contact Mitour for a Free Quote →
Provide target quantity, color preference, logo method, logo file, and packaging requirements. Factory-direct response within 24 business hours.
